appears you are one of the dialog windowįor MODEL LAYOUT and apply the following settings needĭefinition CTB file was previously installed files from the default thickness of lines and other elements in the drawing that is on paper.
It is necessary to click the Modify buttonĪfter clicking on the Modify button. The first mode is a MODEL and the second mode Layout1. For more details see the link line thickness for plotting in colorįor the very initial print shop drawings on A4 or A3 paper or some other format securities with requirements that are listed at the beginning should be positioned in the Model or Layout (whichever you want to print)Īfter positioning in one of these modes it is necessary to run the command File => Page Setup Manager and in accordance with the positioning we have one of the following dialog window. So look at the Plot Style Manager to customize settings for your plotter. The respective settings you can adjust the thickness of the lines on the printed drawing. If you’re drawing after plotting (printing) is not in color and have a plotter (printer), color settings, see the Layer for plotting. In as much plot (print) a drawing that requires you to have MOVERS in two ways. – Installed the printer (plotter) or virtual printerįinished drawing (or part of the drawing) can PLOT in several ways. Preparations for the PLOT-strengthening drawings are as follows: Plotting of drawings (drafting) is carried out through a previously prepared CTB file with adjusted line thicknesses and colors. So when you finish drawing you can print to the printer (plotters) or a virtual printer in the form of formats (JPG, PNG, etc.). CIVIL_ENGINEERING PLOT – Printing in AutoCAD 2007Īs you know every program (well, almost every good 😉 may have a function (command) to print your work.
0 kommentar(er)
